When it comes to liners for single or dual 15-inch, 16-inch or 16.5-inch wheels – front and rear – FastLiner is the best-fitting solution. With its universal fit, the liner works perfectly with just about every wheel. Constructed of tough, highly polished 304L stainless steel, FastLiner will not rust, corrode, stain, flake or peel. So it’s the best-looking solution, too, delivering years of maintenance-free performance and beauty.
FastLiner’s one-piece construction features permanently attached simulated lug nuts. With no loose parts, no assembly and no lug nut removal required, FastLiner offers easy, do-it-yourself mounting in minutes plus quick removal for wheel inspection.
Rolled outer edges provide added strength, ensuring safer handling while protecting against potential shipping and tire damage. Plus FasLiner’s state-of-the-art design and its independently tested and road-proven retention system mean each liner attaches securely, staying in place even in the roughest conditions.
FastLiner carries a one-year limited warranty against manufacturing defects. And fewer skus mean easier inventory tracking for retailers.
Coil Return Policy
Fastliner stainless steel wheel accessories are warranted for one (1) year from the date of purchase.
This warranty covers any defects in material or workmanship when the product is properly installed on those vehicles for which it is designed. Not covered under this warranty are removal and installation costs, shipping costs on any returned item, damage caused in vehicle accidents or incidental or consequestial damages such as, but not limited to, expense for loss of your vehicle, rental or delivery vehicles and other types of commercially used vehicles.
Should the product fail for any reason covered under this warranty, it should be returned prepaid to Dicor Corporation, with proof of purchase by the original purchaser with a letter explaining the nature of the problem. Upon verification, Dicor Corporation will repair or replace the defective part at its discretion and at no charge to the original purhaser.
Replacement parts are available for all FastLiner wheel simulator sets. To order parts, find the appropriate wheel set part number (from the chart below) for your motorhome. Then click on the Dicor part number to see the parts that are available in the shopping cart.
(Not Budd Wheels)
|Dicor Part Number||
Vehicle Year &
Wheel Manufacturer &
|FL60-59||2007 to current E-350/450 Ford||16˝ 8 lug, 4 hand hole||Universal Application|
|FL62||1992 to March 2007 E-350/450 Ford||16˝ 8 lug, 8 hand hole||Accuride 28618|
1973 to current GM
1973 to 1984 Ford
1984 to 1993 Dodge
|16.5˝ 8 lug, 4 hand hole||Universal Application|
|Dicor Part Number||Vehicle Year & Model||Wheel Description||Wheel Manufacturer & Wheel Numbers|
|FLS50||Universal||15˝ 6 lug||Universal Application|
|FLS60||Universal||16˝ 8 lug||Universal Application|
|FLT 60||Tandem Trailer Set||16" X 6.00" - 8 Lug/4 Hand Holes||Dexter #17-279|
|SHSF1608||Sprinter||16" - 6 Lug/12 Round & Oblong Hand Holes||Sprinter|
|SHSF1612||Sprinter - 2012 (May)||16" 6 Lug/18 Round Hand Holes||Sprinter|
Click here for detailed installation instructions.
Please read and save instructions. Do not loosen or remove lug nuts.
Note: Set the vehicle parking brake prior to wheel product installation.
Clean your Dicor wheel cover/liner regularly to keep road dirt from building up.
- Rinse with clean water to remove loose dust and dirt.
- Clean with a mild soap and water solution (Any non-abrasive household detergent works fine). Apply with cloth, sponge or soft bristled brush. Use solution liberally to avoid surface scratching due to trapped dirt on the applicator. NOTE: Do not use hard detergents, acids or abrasives which may scratch or dull the surface. The applicator cloth, sponge or soft bristle brush should be non-metallic and non-abrasive.
- Rinse thoroughly with clean water to remove excess soap and dirt.
- Repeat above steps as required.
- If stubborn stains persist, such as road tar, brake dust, oil, etc., use only a product compatible with stainless steel. An over the-counter window cleaner (like Windex) will often remove foreign material. If a harsher cleaner is needed, we reccommend "Never Dull", available at many general hardware or automotive stores.
Surface Rust: From time to time, surface "spin out" rust may appear on the stainless steel. Normally the "spin out" rust comes from the wheel, lug nuts, locator pins, etc. In many cases, regular normal cleaning of your decorative wheel product, as indicated above, will remove any surface rust. If, however, a stubborn rust spot remains, utilize "Never Dull" (a wadding polish), apply contstant pressure to remove any surface blemish. You may have to repeat this process on hard to remove spots. After cleaning with "Never Dull" you may want to re-shine your wheel product using Windex or a similar product.
Petroleum-based tire conditioners: While the use of these products (Armor-All, Son-of-a-Gun, etc.) may improve the appearance of your tires, these types of products will form a film on your stainless steel wheel cover products. To remove, use a mild cleanser, like Windex, to restore the shine.