Ultra sealant is UV stabilized to prevent deterioration and discoloration. Plus, it will not stain or discolor any roofing material to which it is applied.
The Ultra sealant is available in white.
Self-Leveling (for horizontal surfaces)
||10.3 oz. tube
Ultra Sealant Adheres to:
Without Primer: PVC, Dicor Signature Silicone Coating, Aluminum, Brass, Steel, Fiberglass, Polycarbonate Plastics, SMC, ABS, Kynar, Galvalume, painted surfaces, vinyl, glass, granite, marble and wood.
Requires Primer: TPO, EPDM, Polypropylene Plastics
Surface Preparation: Prior to application, clean surface of all dirt, loose paint, rust, oil and grease. Allow surface to dry before applying sealant. Use standard caulking equipment to apply sealant. Apply above 40°F.
Priming: To ensure a tong-lasting bond and weatherproof bond, Dicor Ultra Sealant Primer is REQUIRED when sealing on TPO and EPDM Rubber roof membranes and also REQUIRED on any polypropylene plastic rooftop accessories. Do not prime polycarbonate plastic accessories, such as polycarbonate skylights.
Directions for use:
Once all primed areas have dried, using a standard caulking or air gun, promptly apply a bead of Dicor Ultra Sealant. At 77° with 50% relative humidity skin time is 30 min., tack free in less than 1 hr. and dry in 2 hrs. May take several days to fully cure. Formulated for 1/4″ and 3/8″ bead.
Approximate Lap Sealant Cure Times: (approximate times for 50-70° F weather)
30 Minutes – Skins over
< 1 hour – Tack Free
2 hours – Dry
Several Days – 100% Cure
Click here for downloadable SDS sheet for 610SASLW-1