For use on all TPO Roofing
Surface Preparation:
All surfaces must be cleaned and free from dirt, leaves, grease oil or other contaminates. Any rocks, branches, or other large objects should also be removed. Be sure all surfaces are completely dry before priming.
Weather Precautions:
Only apply product when the surface and ambient temperatures are between 35°F (1°C) and 100°F (37°C). Product should be stored between 50°F (10°C) and 80°F (26°C) for 24 hours prior to installation.
Application:
Stir until an even consistency is achieved. Do not thin the product. Apply using a brush or 1″ nap roller. Apply at an approximate coverage rate of 225 sq. ft. per quart. Application should be as thin as possible. Allow 1 – 2 hours to dry. Follow with two coats of Dicor Signature Extended Life Silicone Coating. Uncured product may be removed with methyl ester. Application equipment should be cleaned immediately after use with methyl ester.
NOTE: Entire project must be completed in one day; including primer application and 2 coats of silicone coating, each dry to the touch.