Butyl Sealant

To purchase please contact your
Local RV Dealer.

Dicor Products’ new gunnable butyl rubber sealant is a single component, solvent release butyl-based sealant specifically designed to provide a watertight primary seal between lapping substrates and joints. It is easy to apply and tool and exhibits superior adhesion to a variety of clean surfaces.

Butyl rubber sealant shows excellent resistance to weathering, shrinking and cracking. It’s gun-ability allows for a mess-free application, forming an airtight seal and will leave you with a seamless finish.

SKU: 451BSG-1

Category:

delmo_green_caulk02-copyhlvd
Dicor’s Gunnable Butyl Sealant adheres to TPO, EPDM, PVC, glass, metals, aluminum, concrete, wood and some plastics stabilized to prevent deterioration and discoloration. This is for use on skylights, vents, windows, termination rails. The easy caulk gun applicator makes for a mess free, seamless application. The butyl sealant dries to a putty-like consistency and creates an airtight, strong seal that resists degradation.
 
The sealant comes in grey and is UV resistant.
 

Approximate coverage per tube in linear feet:

3/8” bead – 11 ft.

1/4” bead – 24 ft.
Coverage results dependent on bead size.

 

 

Additional information

Weight 1.2 lbs
Dimensions 11.25 × 2 × 2 in

Surface Preparation: Prior to application, clean surface of all dirt, loose paint, rust, oil and grease. Allow surface to dry before applying sealant.
 
Directions for use: Once all areas have dried, cut nozzle to desired bead size and puncture inner seal. Using a standard caulking gun, apply bead at a 45 angle using constant pressure. Use at room temperature for ease of gunning. Tool or join surfaces for sealing before material skins. Support tooled or joined surfaces for 8 hours minimum. Use mineral spirits to remove excess material before skin forms.

Click here for downloadable SDS sheet for 451BSG.

Related products